漢書 dos 仍不能運行舊 PE
漢書 dos 仍不能運行舊 PE
1. 漢書 dos 是否 是不能運行 舊的 PE ?!
2. 怎樣在 he8 的 "頁頂" 或 "最底" 顯示 "今天日期" 及 "現在時間" ?
3. 怎樣在 he8 中看到的 中文字 是 純英文字符 ? 在 winme 的 dos
就可轉看到.
4. 怎樣消除 我初始 進入 he8 的 "路徑 default" ?
5. 怎樣設定 he8 為 "IE" Default 編輯器? 如在 IE "檢視原始檔" 時用
he8 打開.
謝謝解答!
2. 怎樣在 he8 的 "頁頂" 或 "最底" 顯示 "今天日期" 及 "現在時間" ?
3. 怎樣在 he8 中看到的 中文字 是 純英文字符 ? 在 winme 的 dos
就可轉看到.
4. 怎樣消除 我初始 進入 he8 的 "路徑 default" ?
5. 怎樣設定 he8 為 "IE" Default 編輯器? 如在 IE "檢視原始檔" 時用
he8 打開.
謝謝解答!
第 5 項:在 regedit 中修改
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\View Source Editor\Editor Name]
(預設值) 設為漢書 he8.exe 的檔名含路徑即可。
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\View Source Editor\Editor Name]
(預設值) 設為漢書 he8.exe 的檔名含路徑即可。
沒空更新的網頁...
http://dllee.ktop.com.tw C及指標教學,計算機概論,資訊管理導論... http://dllee.adsldns.org 介紹Shells,LiteStep,GeoShell....
http://dllee.ktop.com.tw C及指標教學,計算機概論,資訊管理導論... http://dllee.adsldns.org 介紹Shells,LiteStep,GeoShell....
第 5 項:在 regedit 中修改
(1).. [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\View Source Editor\Editor Name]
My window is "XP", must add: ...
(2).. [HKEY_CURRENT_MACHINE\Software\Microsoft\Internet Explorer\View Source Editor\Editor Name]
**********************************************
由於每次新進入 he8 稍慢, 我用 很笨的 方法,
開機時 load --> he8, 然後永不退出, 下次 Load he8 便很快了.
但怎樣 控制 開機時 load --> he8 後即自動 "最小化" 呢?
謝謝!
(1).. [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\View Source Editor\Editor Name]
My window is "XP", must add: ...
(2).. [HKEY_CURRENT_MACHINE\Software\Microsoft\Internet Explorer\View Source Editor\Editor Name]
**********************************************
由於每次新進入 he8 稍慢, 我用 很笨的 方法,
開機時 load --> he8, 然後永不退出, 下次 Load he8 便很快了.
但怎樣 控制 開機時 load --> he8 後即自動 "最小化" 呢?
謝謝!
我說的 auto path 是這意思:
(1) 我首先 c:\he8\he8.exe
(2) 我再 cd\path1\path2\path3\path4...\path10, 後再
he8 my.txt ( 你把他 auto 變成了 he8 \he8\my.txt !)
這時 我必須打 he8 \path1\path2\path3\path4...\path10
\my.txt, 不知為何, 我在狀態欄打 ee my.txt 也不行! 非得用
手打: e \path1\path2\path3path4...\path10\my.txt !!
我現在學乖了, 進入一新目錄, 只好狠心關了前面所有打開的he8
,再進入新目錄,再 新開 he8 my.txt
(1) 我首先 c:\he8\he8.exe
(2) 我再 cd\path1\path2\path3\path4...\path10, 後再
he8 my.txt ( 你把他 auto 變成了 he8 \he8\my.txt !)
這時 我必須打 he8 \path1\path2\path3\path4...\path10
\my.txt, 不知為何, 我在狀態欄打 ee my.txt 也不行! 非得用
手打: e \path1\path2\path3path4...\path10\my.txt !!
我現在學乖了, 進入一新目錄, 只好狠心關了前面所有打開的he8
,再進入新目錄,再 新開 he8 my.txt
我是經常在 dos 下he8.exe 的命令:
cd\path...\path10
he8.exe path10.txt
cd\x1..\x20
he8 x20.txt ( x20.txt 是 c:\x1..\x20\x20.txt , 但漢書 打開了
c:\path...\path10\x20.txt ?! )
cd\..\...\..\
he8 aa.txt
( aa.txt 是 c:\...\...\...\aa.txt , 但漢書 打開了
c:\path...\path10\aa.txt ?! )
這時在 IE 按右鼠鍵 看 web.htm 原始碼, 叫出之 漢書 竟然是:
c:\path...\path10\windows\temport~\content.ie5\....
...\web.htm
正確是:
c:\windows\temport~\content.ie5\....
...\web.htm
欲要打開本路徑的 某.txt , 在 dos 下命令時 曾打開漢書 過之
檔案 (在別的路徑)須全關閉, 再 he8.exe new.txt 否則
打開的是 首次漢書 c:\dir + '\new.txt'
cd\path...\path10
he8.exe path10.txt
cd\x1..\x20
he8 x20.txt ( x20.txt 是 c:\x1..\x20\x20.txt , 但漢書 打開了
c:\path...\path10\x20.txt ?! )
cd\..\...\..\
he8 aa.txt
( aa.txt 是 c:\...\...\...\aa.txt , 但漢書 打開了
c:\path...\path10\aa.txt ?! )
這時在 IE 按右鼠鍵 看 web.htm 原始碼, 叫出之 漢書 竟然是:
c:\path...\path10\windows\temport~\content.ie5\....
...\web.htm
正確是:
c:\windows\temport~\content.ie5\....
...\web.htm
欲要打開本路徑的 某.txt , 在 dos 下命令時 曾打開漢書 過之
檔案 (在別的路徑)須全關閉, 再 he8.exe new.txt 否則
打開的是 首次漢書 c:\dir + '\new.txt'
小弟認為, 應以 "傳統習慣" 為標準, 請參照 copy 指令之
路徑原則: ( 請將 copy 改為 漢書 he8.exe 可也 )
*** 在 dos 下執行
cd\path1\..\..\path8\path9
copy a.txt d:\ ( 即 copy \path1\..\..\path8\path9\a.txt d:\ )
這時漢書是正確的: he8.exe a.txt
即 == he8.exe \path1\..\..\path8\path9\a.txt
但繼續下面, 漢書處理不好了:
cd\new
copy b.txt c:\ ( 即copy c:\new\b.txt c:\ )
he8.exe b.txt ( 漢書是 he8.exe \path1\..\path9\b.txt ) ?!
這時, 我想要的是: b.txt == c:\new\b.txt ,不是
c:\path1\..\path9\b.txt
路徑原則: ( 請將 copy 改為 漢書 he8.exe 可也 )
*** 在 dos 下執行
cd\path1\..\..\path8\path9
copy a.txt d:\ ( 即 copy \path1\..\..\path8\path9\a.txt d:\ )
這時漢書是正確的: he8.exe a.txt
即 == he8.exe \path1\..\..\path8\path9\a.txt
但繼續下面, 漢書處理不好了:
cd\new
copy b.txt c:\ ( 即copy c:\new\b.txt c:\ )
he8.exe b.txt ( 漢書是 he8.exe \path1\..\path9\b.txt ) ?!
這時, 我想要的是: b.txt == c:\new\b.txt ,不是
c:\path1\..\path9\b.txt
notepad.exe 亦是沒有路徑 "套入" 的.
------------------------------------------------------
*** 在 dos 下執行
cd\path1\..\..\path8\path9
notepad.exe a.txt ( 即 open \path1\..\..\path8\path9\a.txt )
這時漢書是正確的: he8.exe a.txt
即 == he8.exe \path1\..\..\path8\path9\a.txt
但繼續下面, 漢書處理不好了:
cd\new
notepad b.txt ( 即 open c:\new\b.txt c:\ )
he8.exe b.txt ( 漢書是 he8.exe \path1\..\path9\b.txt ) ?!
------------------------------------------------------
*** 在 dos 下執行
cd\path1\..\..\path8\path9
notepad.exe a.txt ( 即 open \path1\..\..\path8\path9\a.txt )
這時漢書是正確的: he8.exe a.txt
即 == he8.exe \path1\..\..\path8\path9\a.txt
但繼續下面, 漢書處理不好了:
cd\new
notepad b.txt ( 即 open c:\new\b.txt c:\ )
he8.exe b.txt ( 漢書是 he8.exe \path1\..\path9\b.txt ) ?!